ECOPRO300 - FIREWOOD PROCESSOR
The Range Road EcoPro300 Firewood Processor comes ready to work and is loaded with features, all you need to do is pick the engine you prefer. The EcoPro300 has the pushing power of our previous 20-ton unit but also has the extra torque of the 27-ton to make splitting easier.
The Range Road EcoPro300 cuts and splits wood in one operation, it can produce over a cord of cut firewood wood an hour.
Operation of the unit is safe and simple, load your log onto the table and roller arm, push into the processor, the log stops at the depth you have preset, grab the saw bar handle, pull down and the saw chain spins and you are cutting through the log, the amount of pressure you apply depends on the density and dryness of the wood, but remember to let the chainsaw do the work. The processor cuts wood to the desired length and then automatically starts splitting the wood, the cut wood drops into the splitter tray and the ram pushes the wood through the splitter, either cutting it in half, or into quarters. Once the ram has finished pushing through the splitter, the ram automatically pulls back, ready for the next piece of wood.
The EcoPro300 has many features ensuring the safety of those operating and assisting in the processing of firewood.
Safety cages around all areas where the action is, if the safety cage over the splitter is opened the hydraulics will not operate.
The log hold-down lever is used to hold the log in place while you cut through with the hydraulic chainsaw.
When you have cut through the log and the bar is at the lower position the log drops into the splitter and the splitter automatically starts.
The height-adjustable two-leg front support assists with balance and stability when operating.
Choice of Engine:
14hp Kohler or 13hp Honda
3 Year Engine Warranty from Kohler/Honda Dealer
Standard EcoPro300 features:
Hydraulic Ram w/7 Second Cycle Time
Hydraulic driven 20" Chainsaw Bar & .325 Chain
Maximum Log Diameter 16"
Maximum Splitting Length 24" (adjustable)
Adjustable 2-4 Way Splitter
Log Hold Down
3 Meter Output Conveyor
10" Wide Conveyor Belt
Conveyor Height 2m based on 16" Length Cuts (longer pieces = lower height)
Emergency Kill Switch
Conveyor Speed Control/Shut Off
Draw Bar w/Tongue Jack
Folds Up Easily for Transport
Shipping crate dimensions 78" L x 34" W x 48" H
Crate weight approx. 1500 lbs.
Details can be found in the Firewood processor accessories page
103- table infeed Hd $3060
104- extension for 103 $1073
102- small table with infeed adjustable $2090
106- infeed with log lift $1795
2521- hydraulic infeed for 300 $995
2540- hyd. bar kit $895
2166- 6 way splitter $228
EcoPro300-K 14hp KOHLER Engine
EcoPro300-H 13hp HONDA Engine
Only available when buying pre-assembled. Not a stocking option.