FIREWOOD PROCESSOR: Image

ECOPRO300 FIREWOOD PROCESSOR

EcoPro300-K 14hp KOHLER Engine

$7530

The Range Road EcoPro300 Firewood Processor comes ready to work and is loaded with features, all you need to do is pick the engine you prefer. The EcoPro300 has the pushing power of our previous 20 Ton unit but also has the extra torque of the 27 ton to make splitting easier.

The Range Road EcoPro300 cuts and splits wood in one operation, it can produce over a cord of cut firewood wood an hour.

Operation of the unit is safe and simple, load your log onto the table and roller arm, push into the processor, the log stops at the depth you have preset, grab the saw bar handle, pull down and the saw chain spins and you are cutting through the log, the amount of pressure you apply depends on the density and dryness of the wood, but remember to let the chainsaw do the work. The processor cuts wood to the desired length and then automatically starts splitting the wood, the cut wood drops into the splitter tray and the ram pushes the wood through the splitter, either cutting it in half, or into quarters. Once the ram has finished pushing through the splitter, the ram automatically pulls back, ready for the next piece of wood.

The EcoPro300 has many features ensuring the safety of those operating and assisting in the processing of firewood.
Safety cages around all areas where the action is, if the safety cage over the splitter is opened the hydraulics will not operate.

The log hold down lever is used to hold the log in place while you cut through with the hydraulic chainsaw.
When you have cut through the log and the bar is at the lower position the log drops into the splitter and the splitter automatically starts.

The height adjustable two leg front support assists with balance and stability when operating.

Choice of Engine: